-
MIK-TDS210-B Conductivity meter
MIK-TDS210-B Conductivity/Hardness/Resistivity Online analyzer, an intelligent Online chemical analyzer, is widely applied for continuous monitoring and measurement of EC value or TDS value or ER value and temperature in the solution in the industry of thermal power, chemical fertilizer, environmental protection, metallurgy, pharmacy, biochemistry, food and water, etc. Features Range:0.01 electrode: 0.02～20.00us/cm
0.1 electrode: 0.2～200.0us/cm
1.0 electrode: 2～2000us/cm
10.0 electrode: 0.02～20ms/cmResolution:±2%FSOutput signal: 4~20mA; Relay; RS485Power supply:AC220V±10%, 50Hz/60HzHotline: +86 13357193976 (WhatApp)Email : vip@meacon.com.cn -
MIK-PSS100 Suspended solids/ TSS/ MLSS meter
MIK-PSS100 Suspended solids meter based on the infrared absorption scattered light method used to measure liquid suspended solids and sludge concentration. Features Range: 0.1 ~ 20000 mg/L; 0.1 ~ 45000 mg/L; 0.1 ~ 120000 mg/LResolution:Less than ± 5% of the measured valuePressure range: ≤0.4MPaPower supply: AC220V±10%; 50Hz/60HzHotline: +86 13357193976 (WhatApp)Email : vip@meacon.com.cn
-
MIK-PH8.0 pH ORP meter
MIK-PH8.0 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance: ≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output: 4-20mA,RS485, Modbus-RTU,Relay
Tel.: +86 13357193976 (WhatApp)Email : vip@meacon.com.cn
-
MIK-PH160S pH ORP meter
MIK-PH160S industrial pH meter is an online pH analyzer with 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance:≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output:4-20mA,RS485, Modbus-RTU,Relay
Tel.: +86 13357193976 (WhatApp)Email : vip@meacon.com.cn
-
MIK-PH5018 Glass pH sensor
MIK-PH5018 glass pH sensor is widely used in wastewater treatment and fields including mining and smelting, papermaking, paper pulp, textiles, petrochemical industry, process of semiconductor electronic industry and downstream engineering of biotechnology. Features
- Zero potential point:7 ± 0.5 pH
- Conversion coefficient: > 98%
- Installation size: Pg13.5
- Pressure: 0 ~ 4 Bar at 25 ℃
- Temperature: 0 ~ 100℃ for general cables
Tel.: +86 13357193976 (WhatApp)Email : vip@meacon.com.cn
-
MIK-DM2800 Membrane dissolved oxygen meter
MIK-DM2800 Membrane type dissolved oxygen is the measure of oxygen dissolved in an aqueous solution. Polarographic measurement principle, the dissolution value depends on the temperature of the aqueous solution, pressure and salinity in solution. The meter uses a liquid crystal display for measuring and displaying DO and medium temperature values, with analog and digital signal outputs and control functions. Features Range: 0-20mg/L,0-200%,0-400hPaResolution:0.01mg/L,0.1%,1hPaOutput signal: 4~20mA; Relay; RS485Power supply: AC220V±10%; 50Hz/60HzHotline: +86 13357193976 (WhatApp)Email : vip@meacon.com.cn
-
MIK-PH5019 Plastic pH sensor
MIK-PH5019 plastic pH sensor is widely used in wastewater treatment and fields including mining and smelting, papermaking, paper pulp, textiles, petrochemical industry, process of semiconductor electronic industry and downstream engineering of biotechnology. Features
- Zero potential point:7 ± 0.5 pH
- Slope: > 98%
- Installation size: 3/4NPT
- Pressure: 1 ~ 3 Bar at 25 ℃
- Temperature: 0 ~ 60℃ for general cables
Tel.: +86 13357193976 (WhatApp)Email :vip@meacon.com.cn
-
MIK-PH5050 high temperature pH sensor
MIK-pH-5050 high temperature glass electrode used in PH measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Zero point: 7 ± 0.5 pH
- Installation thread: 3/4NPT
- Working pressure: 1 ~ 3 Bar at 25 ℃
- Temp: 0 to 60℃ for general cables
Tel.: +86 13357193976 (WhatsApp)Email : vip@meacon.com.cn
-
MIK-PH5022 Germany glass pH sensor
MIK-5022 tecLine electrodes are high-quality sensors for professional applications in process and industrial measurement technology. These electrodes are known for their use of top-quality materials and components. They are designed as combined electrodes (the glass or metal electrode and the reference electrode are combined in one shaft). A temperature probe can also be integrated as an option, depending on the type. Features
- Zero potential point:7 ± 0.5 pH
- Conversion coefficient: > 96%
- Installation size: Pg13.5
- Pressure: 1 ~ 6 Bar at 25 ℃
- Temperature: 0 ~ 130℃ for general cables
-
MIK-DO7011 Membrane dissolved oxygen sensor
MIK-DO7011 Membrane type dissolved oxygen sensor is the measure of oxygen dissolved in an aqueous solution. Polarographic measurement principle, the dissolution value depends on the temperature of the aqueous solution, pressure and salinity in solution. Features Range: DO：0-20 mg/L、0-20 ppm；Temperature：0-45℃Resolution:DO:±3% of the measured value；Temperature：±0.5℃Output signal: 4~20mATemperatureType:NTC 10k/PT1000
-
MIK-PTU8011 Turbidity Sensor
MIK-PTU-8011 turbidity meter based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of turbidity. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of turbidity value. According to the usage environment, self-cleaning function can be equipped with. It assures the stability of data and reliability of performance; with the built-in self-diagnosis function, it can make sure the accurate data be delivered; besides, the installation and calibration is quite simple. Features Range: 0.01-100NTU、0.01－4000NTUResolution:Less than ± 2% of the measured valuePressure range: ≤0.4MPaEnvironment temp: 0~45℃
-
MIK-PH5011 pH sensor
MIK-PH5011 pH sensor increasing the silver ion at the reference sensor part, to enhance the stability and accuracy, suitable for general industrial waste water and discharge solutions.
- Zero potential point: 7±0.25
- Conversion coefficient:≥95%
- Membrane resistance: ＜500Ω
- Practical response time:< 1 min
- Measurement range: 0–14 pH
- Temperature compensation: Pt100/Pt1000/NTC10K
- Temperature: 0~60℃
- Reference: Ag/AgCl
- Pressure resistance: 4 bar at 25 ℃
- Thread Connection: 3/4NPT
- Material: PPS/PC
